Escomatic – CNC – D5 Twin
The escomatic D5 TWIN is equipped with an Affolter CNC System LESTE 10 with 8 axis (optional 10 with 2 C-axis).
The turning operations are identical with the ones of an escomatic D2 CNC or D5 ULTRA. All basic tooling (set of straightening dies and holders, feed rollers and turning tools) are compatible with these machines.
Secondary operations could be carried out with two identical units consisting of:
- Two counter collets (or counter spindles with C-axis) which are mounted on two independent tables with cross slides.
- Two back machining units which are equipped with two axial spindles for drilling, tapping or threading and one cross spindle.
This configuration doubles the back machining operations and three parts are machined simultaneously. With a turning speed of 12’000 min-1 and 18’000 min-1 for Theo back machining, the D5 CNC TWIN is a real machine for very high volume production. The Affolter CNC control LESTE enables simplified and menu driven programming.
Technical Specifications
| Coolant/Cutting Fluid | Oil |
| Tank capacity | 100 L |
|---|---|
| Flow rate of the pump | 30 L/min |
| Max. system pressure | 10 bar |
| Chips container capacity | 40 L |
| Installed power | 4 kVA |
| Compressed air consumption | 7 m³/H |
| Compressed air pressure | 5 bar |
| Average noise pressure level | 67.5 dB (A) |
| Average noise power level | 83.6 dB (A) |
| Length x Width x Height | 2150 mm x 1050 mm x 1580 mm |
| Length x Width x Height with coil reel | 2750 mm x 1050 mm x 1580 mm |
| Net weight | 1150 kg |
| Gross Weight | 1250 kg |
Key Features
- Equipped with an Affolter CNC System LESTE 10 with 8 axes (optional 10 with 2 C-axis).
- Turning speed of 12’000 min-1 and 18’000 min-1 for the back machining
- The special configuration of the D5 TWIN doubles the back machining operations and three parts are machined simultaneously.
Key Industries
- Aerospace
- Automotive
- Machinery & Manufacturing
- Energy
- Semiconductor, Solar & Electronics
Brand
For over 60 years, the ESCO company has been dedicated to and specialized in the development and manufacturing of automatic and numerically-controlled lathes used for the production of small diameter parts ranging from 0.30 to 8.00 mm. Unlike conventional lathes, escomatic lathes are based on a unique concept. The material, which is coil stock or bar, does not rotate. The cutting tools are mounted onto the tool head which rotates around the material to produce the components. ESCO SA is represented by Agents or Distributors experienced on Escomatic products in more than 20 countries.
