ESAGON High Speed Machining Center

The milling center to portal and fixed bed for high speed machinings ESAGON, currently represents the more advanced generation of tools machines. Entirely characterized by a projected structure resorting to the systems of optimization through calculation to finished elements, FEM, with the objective to get an extremely rigid and very dynamic configuration, has been conceived for answering to the widest and diversify applications of various customers and therefore can satisfy demands of machinings to 3, 4 and 5 axes.

SHARK High Speed Machining Centre

SHARK is a high speed machining centre line with a fixed bed and a movable column. Being designed by means of the calculation of finite elements for machine structures (FEM), the machine represents an optimised development assuring rigidity and vibration dumping during movements. In addition to that low friction rates and high axes acceleration values are important features which allow high dynamical performances in finishing and at the same time in roughing: a big advantage in reducing production costs during machining process.

The model HS-HSL-LINEAR is a high speed milling machine characterized for its fixed bed configuration and mobile uppercut. Projected with the aid of the modern methodologies of optimization through the calculation to finite elements, FEM, introduces a good point of meeting between rigidity in the movements and damping of the vibrations.

The model HSC-LINEAR is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration. Projected with the aid of the modern methodologies of optimization through the calculation to finished elements, FEM, introduces good characteristics of rigidity in the movements and damping of the vibrations. If to this the low attritions and the elevated accelerations of the axes are added, are obtained so all the characteristics that allow to get particularly bright dynamic performances in finish, but at the same time make it a very performing in roughing. The all to advantage of the economy of the whole cycle of machining.

The model ACTIVE FIVE is a high speed working center with fixed portal and mobile table solution characterized by a very compact and ergonomic line. The machine is equipped with a head to two continuous working axes. The planning with the aid of the system FEM has allowed to optimize the calculation to finished elements making the particularly rigid structures of this model with the total elimination of the vibrations in phase of milling. If to this are added the low attritions and the elevated accelerations of the axes, are gotten so all the characteristics that allow to get particularly bright dynamic performances is in finish, that in roughing, to advantage of the economy of the whole cycle of milling.

The model BLADER LINEAR is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration. Projected with the aid of the modern methodologies of optimization through the calculation to finished elements, FEM, introduces good characteristics of rigidity in the movements and damping of the vibrations. If to this the low attritions and the elevated accelerations of the axes are added, are obtained so all the characteristics that allow to get particularly bright dynamic performances in finish, but at the same time make it a very performing in roughing. The all to advantage of the economy of the whole cycle of machining.

The model PHS is a high speed working center with fixed portal and mobile table solution characterized by a very compact and ergonomic line. The planning with the aid of the FEM system has allowed to optimize the calculation to finished elements making the particularly rigid structures of this model with the total elimination of the vibrations in phase of milling.

TWIN CONCEPT is a line of high speed milling machines characterized by fixed and mobile bench, which varies from the double working area (patented) for independent machinings with 3-4-5 axes to the machinings of pieces with 3-4 independent axes or with 5 axes at the same time time (patented) to complete the machinings of “twin” pieces with machinings to 3-4-5 axes. Having been projected through the calculation to ended elements, FEM, TWIN CONCEPT introduces all the good characteristics that countersign the OMV products.

The model ROLLER is a high speed working center with fixed portal and mobile table solution characterized by a head with continuous axis of positioning and from a rotary table as continuous working axis. The planning with the aid of the system FEM has allowed to optimize the calculation to finished elements making the particularly rigid structures of this model with the total elimination of the vibrations in phase of milling.

DIAMOND machining center

philosophy and design technology

In designing the DIAMOND machine the choice has fallen on the gantry structure concept design due to the main importance of WORKPIECE HELD IN A STEADY POSITION

This allows maximum speed and accuracy as moving masses are always constant and known

WORKPIECE WEIGHT = VARIABLE MASS

MOVING AXES = CONSTANT MASS

accuracy thermostatic system

Over ten years experience in thermal stabilization of the machine structures, see XS, FORMULA, INVAR etc., in ensuring the consistency of the machine accuracy in presence of ambient temperature changes, the gantry of the DIAMOND is completely insulated and thermo stabilized thanks to a patented thermal conditioning system, avoiding structural distortions caused by variations in the ambient temperature.

ML150 machining center

This is the line of machining centre with “traditional technology”, duly designed for heavy duty machining on hard materials (steel, inconel, titanium, etc.). The concept of the ML line is a modular design to allow large dimensional capacity in machining and the application in various industries

ML200 ML120machining center

This is the line of machining centre with “traditional technology”, duly designed for heavy duty machining on hard materials (steel, inconel, titanium, etc.). The concept of the ML line is a modular design to allow large dimensional capacity in machining and the application in various industries

XS Boring Machine

The XS is the line of medium/large size gantry machines. It is dedicated to 3 – 5 axis high speed machining as well as heavy duty machining on hard materials (steel, inconel, titanium, etc). The possibility to have automatic head changing system or as alternative, the automatic spindle cartridge change, allows the machines to be much flexible and suitable for complex machining both in moulds/dies industry and in aerospace industry.

BF machining center

The BF line features a full 5 axis milling head duly designed for profiling jobs in hard materials (steel, inconel, titanium, etc).

LHS machining centre

The LHS line features a longitudinally moving column. It is a medium / large size machining centre with 3 or 5 machining axis. Due to its structure, the machine is suitable for various applications : with moving rotary table, with automatic head change system and with multi working zones. Due to its application flexibility, the machine is suitable for moulds / dies machining, structural aerospace parts and general machining.

FORMULA floor type milling machine

Product Introduction

ELECTRA is a very versatile floor type high dynamic milling machine featuring high technology solutions. Wide range of configurations on multiple axis, modularity on travels and various accessories (milling heads, heads auto change, rotary tables, ATCs, automation). The machine is ideal for roughing and finishing operation on medium and large parts and can be installed in mould and die operations, aeronautic and power generation industry as well as in general job shops.

Thermal Management

Thanks to patented technological solutions, the thermal management system ensures a continuous and reliable level of precision in environments subject to thermal variations.