The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow Indexers. The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die) from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.

The 6MPCA is the most advanced model offered within the Ray-Ran Range of Melt Flow Indexers. The operating procedure is very simple to undertake using its on board advanced microprocessor technology. The large liquid crystal display (LCD) provides simple on screen instructions reducing user error and the test parameters are easily entered via the alpha numeric membrane keypad. The apparatus can accurately determine results for MFR, MVR and Density at test temperature.

Bulk density apparatus is testing equipment used to measure the bulk density property of powder, granules and other “divided” solids, especially used in reference to mineral components (soil, gravel, sand), chemical substances, (pharmaceutical), plastics like polyethylene (hdpe or mdpe) pvc, polystyrene etc, or foodstuff and any other masses of granular or particulate matter. The Method A tester is primarily used to measure the apparent density of fine granules that can be poured readily through a “V” shaped funnel, the material under test is allowed to flow into a cylindrical cup with a known volume of 100cm³.

The Auto Density Gradient Apparatus from Ray-Ran has become the world’s benchmark for accurate density measurement of small solid specimens using the column method. Offered as a 3 or 6 column version, the built-in on-board Microprocessor System accurately calculates the specimen’s density more quickly and more accurately by using the latest linear encoder technology that measures the samples position in the column relative to the calibrated glass marker floats. Once the correct position of the sample is recorded the density is displayed on the LCD screen.

MagCore® Plus II is the newest robotic bench-top workstation for a fast and high-yield nucleic acid purification from virtually all molecular diagnostic, biological, clinical and forensic sample types. With small footprint, light weight, user friendly interface, and a broad range of entirely built-in programs with free upgrades, 1-16 samples can be isolated simultaneously at your fingertip. The instrument simplifies your daily routine providing full traceability of kits and samples, through real-time mobile monitoring and a complete report that can be downloaded on a computer at the end of each run.

MagCore® HF48 is a powerful system with consistent and simultaneous processing of 1st~24th or 24th~48th samples of DNA/RNA at A/B operation zones. It provides fast, cost-effective, and automated extraction purification of nucleic acids from diverse sample types including whole blood, bacteria cells, plant cells, cultured cells, virus particles and tissues. With a sterilization system built-in, optimized protocols pre-programmed and magnetic bead-based reagent cartridges supplied, MagCore® HF48 provides users a fast, efficient and cross-contamination-free isolation of various DNA/RNA samples. Its superb processing capacity makes itself a perfect solution for high-capacity nucleic acid purification.

MagCore® Super is RBC Bioscience’s most advanced and efficient robotic workstation for nucleic acid extraction. It is the first platform combining EXTRACTOR and SPECTROPHOTOMETER. Users are benefited with automatic purification, OD values retrieval and final eluate concentration measurement. It is equipped with a colored touch screen, thermo printer, barcode scanner, USB flash p&p.

Innovation at Your Fingertips

RedShiftBio’s AQS³pro overcomes many of the limitations of traditional spectroscopy-based technologies with ultrasensitive, highly reproducible, automated structural measurements of proteins and other biomolecules. It can be used for a wide range of applications from formulation development of mAb-based biotherapeutics to robust measurements of ADCs, AAVs, and mRNA. Powered by Microfluidic Modulation Spectroscopy (MMS), the AQS³pro is designed to provide five key measurements— aggregation, quantitation, stability, similarity, structure—directly supports biomolecule characterization throughout the biopharmaceutical development pipeline.

Key features:

• Ability to measure wide range of native sample concentrations from <0.1 mg/ml to >200 mg/ml
• Fully automated sample-handling, with both 24 and 96 well plate formats
• Real-time background subtraction eliminates need to dialyze samples
• Detection of <2% change in secondary structure even at low concentrations
• Advanced onboard data analytics enabling rapid and robust data interpretation and reporting

RENO-S30 Low Temperature Plasma H2O2 Gas Sterilizer for Reliable Sterilization.

Retsch Jaw Crushers are used for the rapid, powerful crushing and pre-crushing of medium-hard, hard, brittle and tough materials. The variety of materials offered, their efficiency and safety make them ideal for sample preparation in laboratories and industrial plants.

Applications

Alloys, basalt, cement clinker, ceramics, chamotte, coal, coke, construction materials, feldspar, glass, granite, minerals, ores, oxide ceramics, quartz, rocks, silicon, slag…

VROC® powered viscometers require small samples and are quick and easy to obtain accurate viscosity measurements. RheoSense’s proprietary technology powers all of our viscometers; enabling ease of use, smaller samples, and a wider dynamic range (shear rate and temperature).