Koehler – Flash Point Tester – Automatic Abel Flash Point Tester
The Automatic Abel Flash Point Tester is used primarily to test flammable and combustible materials for shipping and safety regulations. The flash tester provides an increased temperature range of operation as compared with other testers, allowing greater flexibility in testing samples according to the Abel test method. The unit provides a test range to 110°C and can be extended to –30°C by any appropriate external chiller. The flash point tests are simply conducted by mounting the flash cup filled with sample into the test position and selecting a pre- or user-programmed test method. Automation routines provide accurate test results. A quick search method is available to determine the flash point of unknown samples. The dual detection system (thermal and ionization) allows for testing all types of products. Ignition by gas flame or electrical ignitor is included, along with safety cut-off devices. Test results are automatically corrected to standard pressure (101.3 kPa). The system is equipped with a differential Pt-100 RTD probe designed to duplicate the response time of a mercury-in-glass thermometer and with multiple sensors that continually monitor instrument function, displaying an error message if a problem is detected. Supervision software is included.
Available Models
Technical Specifications
| Compliance | IP 170; ISO 13016; NF T 66-009; DIN 51755 |
|---|---|
| Temperature Range | Ambient to 110°C; Subambient to -40°C with external cooling |
| Power Requirements | 230V 50/60Hz |
| Dimensions (cm) | 26 x 5.53 x 50 |
| Net weight | 27.2 kg |
- Conforms to IP 170 and related specifications
- Simple automation routine for easy operation
- Data Storage 200 results
- Quick Access to calibration parameters
- Auto Diagnostic
- Optional low gas cartridge to wok in all types of environments
- Automatic gas cut-odd at the end of the test
- Optional cryostat required for samples having a FP below 40°C
- Automatic Electronic Control of the heating rate during testing
- Heating by Solid Block Element
- Cooling by External Cryostat
Technical Specifications
| Compliance | IP 170, ISO 13736 |
|---|---|
| Temperature Range | -30°C and 70°C |
| Power Requirements | 220-240V 50/60Hz |
| Dimensions (cm) | 25.4 x 44.5 x 29.2 |
| Net weight | 11.34 kg |
The Abel Closed cup flash point tester is used primarily to test flammable and combustible materials for shipping and safety regulations. Consists of test flame applicator, brass test cup, thermometer support, heating plate and electric heater. Applicator is precisely aligned per specifications and pivots for test flame application at specified temperature intervals. Hinged thermometer support raises to facilitate placement and removal of test cup. Adjust flame size using built-in needle valve and comparison bead. Equipped with a 400W nickel-chromium heater with stepless variable heat control for accurate repeat setting of temperature rate of rise per specifications
- Conforms to IP 170 and related specifications
- For flash points between -30°C and 70°C
Technical Specifications
| Compliance | IP 170; ISO 13016; NF T 66-009; DIN 51755 |
|---|---|
| Temperature Range | Ambient to 110°C; Subambient to -40°C with external cooling |
| Power Requirements | 230V 50/60Hz |
| Dimensions (cm) | 26 x 5.53 x 50 |
| Net weight | 27.2 kg |
- Conforms to IP 170 and related specifications
- Simple automation routine for easy operation
- Data Storage 200 results
- Quick Access to calibration parameters
- Auto Diagnostic
- Optional low gas cartridge to wok in all types of environments
- Automatic gas cut-odd at the end of the test
- Optional cryostat required for samples having a FP below 40°C
- Automatic Electronic Control of the heating rate during testing
- Heating by Solid Block Element
- Cooling by External Cryostat
Technical Specifications
| Compliance | IP 170, ISO 13736 |
|---|---|
| Temperature Range | -30°C and 70°C |
| Power Requirements | 220-240V 50/60Hz |
| Dimensions (cm) | 25.4 x 44.5 x 29.2 |
| Net weight | 11.34 kg |
The Abel Closed cup flash point tester is used primarily to test flammable and combustible materials for shipping and safety regulations. Consists of test flame applicator, brass test cup, thermometer support, heating plate and electric heater. Applicator is precisely aligned per specifications and pivots for test flame application at specified temperature intervals. Hinged thermometer support raises to facilitate placement and removal of test cup. Adjust flame size using built-in needle valve and comparison bead. Equipped with a 400W nickel-chromium heater with stepless variable heat control for accurate repeat setting of temperature rate of rise per specifications
- Conforms to IP 170 and related specifications
- For flash points between -30°C and 70°C
Key Industries
- Chemical
- Education & Academics
- Environmental
- Oil & Gas
- Chemical
- Education & Academics
- Environmental
- Oil & Gas
Brand
Providing quality testing instrumentation and technical support services for research and testing laboratories has been our specialty since 1925. Meeting your testing needs is the primary focus of our business, which is why Koehler Instrument Company is a leading producer and supplier of petroleum, synfuels and petrochemical instrumentation worldwide. At Koehler, we pride ourselves in innovation. In a time of continuous technological advancement and transition we are constantly implementing new and improved ways to surpass the needs of an ever-evolving industry. Koehler products are backed by our staff of technically knowledgeable, trained specialists who are experienced in both petroleum products testing and instrument service, which is carried out either on site or at a Koehler service center.
Similar Products
